A reputation built one customer at a time
Trusted by tens of thousands
4.9 out of 4524 reviews
All product reviews
2023 Toyota Tundra
The paper instructions were very hard to follow. I relied on the you tube video. A closer view of the install would have been ideal. I called customer service with a question, resolved quickly. Now that it is on, I love it.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2024 Ford F-150
I want to say this cover looks and works amazing NOW. Before I bought the cover I read the reviews, all the F150 reviews and they were for the most part good. I also watched the installation video a couple of times, it didn't look too bad. So I bought the cover. This is going on a 2024 1 week old F150. So I start to read the directions and they seemed ok. BUT when I started to put the brackets on they would not fit because my bed liner is a Ford plastic bed liner not the spray on that is shown in the video. What does that mean... yup get the saw out and start trimming that new liner and try not to scratch that new truck(Good Luck). It wasn't too bad but definitely not what I wanted to do. I did call them to verify and they said yes the liner would have to be trimmed and sent pics of what I already did(very nice lady though). The next step was to put the piece across the back under the window. Guess what it did not fit because the cover was in the way so I called them AGAIN and sure enough they said I had to notch each side of the liner and again they sent me pics and were quick about it and very nice. I asked at that time if I had to cut the whole lip across the back and they said no just notches on the side. WELL you guessed it still didn't fit and low and behold eventually they said I had to cut the lip off all across the bed. Good luck not scratching the new truck, not possible. they wanted me to leave a 1/4" to give the back of the cover some integrity, but for my cover it took the stiffness away and the back would not stay on back of the bed, I had to use Sheetmetal screws to keep it against the back wall. After that I assembled the rails and got the cover on the truck. With all the cutting and calling customer service I had 4 hours into it and it looked terrible, I tried to adjust it and could not get it right, because I couldn't get it to fit right the rear seal on the cover tore so that will need replaced. I ended up taking my truck to the local truck accessory shop and they re-fit and adjusted the cover perfectly. With that said I love the cover LOOKS, EASE OF USE AND EASY TO REMOVE AND REINSTALL THE COVER. I love it!!!! Here is the bottom line. I wish they would show the installment with the drop in bed liner even mention all the cutting and trimming needed. they do mention it on page 4 or 5 of the instructions. I think it needs to be up front on the web page. Also it did cost me $150 to have it re-fit and the truck is a lease so I will have to replace the bedliner when turning the truck in and hopefully not notice the scratches. I still would recommend the cover BUT, consider having a dealer putting it on. I wish I would have thought of that to start. I think they should replace the seal that tore but we will see. Hope this helps!
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
Jacob R
2024 GMC Sierra 1500
This is a great company, there tonneau cover is well designed and manufactured in the US. The customer service is outstanding. Simple to install and easy to use, and it looks greaton my truck.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2023 Ford Raptor
Customer service was very responsive and they tried to help troubleshoot several issues. Unfortunately, my cover never worked as advertised. The cover would get stuck, the mechanism to secure the cover in the closed position will no longer engage, and it allows in too much water to store anything in the bed. Disappointed overall.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2020 GMC Sierra 3500
Installed this on my 2020 GMC AT4 3500 HD with 6',10" bed. I looked around for a Tonneau cover that wouldn't block my view when folded up. Found the Peragon cover and was very impressed with the way it worked and looked. Ordered the LimitedHDx Edition XRP Rugged Matte Finish, and installed it as soon as I got it. I am more than happy with the way it works and functions. Looking forward to not having to watch my weather app and throwing a tarp on my stuff. Also excited for winter and not having to shovel snow out of the bed. Would highly recommend this cover!
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2020 GMC Sierra 1500
HAVE TRIED OTHER COVERS BUT THIS IS BY FAR THE BEST ONE I HAVE EVER BOUGHT. ADDED BONUS MADE IN THE USA
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2015 Ram 2500
This cover is a game changer. It’s so easy to use when we take our fifth wheel camping we can just close the cover after unhooking the camper and everything is safe and secure. It looks great on my truck, not tacky like the roll up type can. Very easy to fold up and pull out! Their customer service is fantastic, I had an issue and they took care of it right away no hassle at all! I would buy from this company again and again!
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2024 Toyota Tundra
Looked at many different ones but ended up with a Peragon. Can’t be anymore happier with the cover and how it’s designed to fit for my truck. Got it had video for step by step on installing it or use the manual. Started to install and was missing a piece, so called and they sent it over night to me with out me asking to do that. Will buy again in future. Customer service was 10/10 and the cover itself 10/10 Quality.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2024 Ford F-150
Would recommend this cover and the support team any day of the week. I went with the Limited HDX after looking at the options. The Keyless Dual Action lock is so sweet. Very pleased to have made the upgrade. Install was a breeze especially with the install videos that are available. Had one minor issue after about a week where one of the roller brackets broke. Emailed the support team and Jacob was all over and got a replacement part out right away and sent instructions on what to do. 5 minute swap out and was good to go. That's some serious customer service. I have had quote a few friends and customers comment on how nice it looks and they get jealous when the see how easy the locking and retracting is. You will not be disappointed going with a Paragon Bed Cover!
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2021 Toyota Tacoma
The only problems I ran into during installation were my fault. Once I figured it out, it was easy. The cover looks great and works great, and it's nice and sturdy. Just watch the videos and more importantly, watch the video explaining how the cover works and it will all make sense. I'd buy it again without thinking about it. Good quality and American made!
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2020 Chevrolet Silverado 1500
Great product, and the service was top notch!
The Aluminum is a little easy to damage in terms of denting, so be aware of that.
There were parts of the installation video that were not super clear, that made it a little more difficult than I expected, but once it was installed it looks and acts great!
During the installation process a wheel broke off and the service was UNBELIEVABLE! That is why you buy American made. They went above and beyond without asking and made any frustrations from that process disappear! Jason was who I worked with and he and the team at Peragon was outstanding!
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2021 Ram 1500
Instalation was a breeze. Able to knock it out by myself in the evening after work within 45min to 1hr.
Don't toss the boxes wor rip the up as you will need them to set components on as you put together. Just follow the directions and in no time you will be done.
The pannels felt light and flimsy up on first inspection. Bit once everything is together then it seems like it's just right for the application.
Not 100% water tight as it dose leak slightly where the panels fold and go under the sidewall seal. But will still trust it to keep things mostly dry and secure. I have the HD. If you go this route them be aware that the two side locking rods are close to bracket with sharp edges. It may be beneficial to have bed lights and also file the edges off the rear most (tailgate side) brackets.
All In all it was a hood purchase.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2005 Dodge Ram 1500
Great support and they make you feel part of their team, family atmosphere great cover for versatile use.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2008 Chevrolet Silverado 1500
I bought my cover used about 8 years ago. After years of use I needed to replace a few parts. After spending the time trying to figure out where to get the parts I thought go to the Peragon website. Wow they no longer use the long pop rivets so I was disappointed. But what does a classy outfit do , they give you a alternative method to make the repairs. Giving a full plan from the size and lengths of all hardware and step by steps to make it happen. I’m a customer for life with these guys and when I get to the time to get a new one it will be a Peragon cover for sure.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2017 Ram 1500
I put the cover on in an hour and a half. They have a good instructional video and an excellent installation booklet that is well illustrated.
I had a helper to set the trailers on the truck.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2020 Ford F-150
Read a lot of the negative reviews here and I'm surprised. This is the second Paragon I've owned on two F150's and both have given excellent service. Installation, especially on the Ford is a little problematic as the rails on the it are slightly curved. However, with a little patience the lid goes on and I've noticed it is a tighter fit on the 2020 than my previous 2013. There are some post installation adjustments that are needed to get the top exactly right. It is not completely water tight and that is to be expected with the way the top fits into the channels. The bulkhead seal is the most problem. On both installs it was difficult to get the rubber seal seated without wrinkling. That is the point where the most water enters the bed, especially at the carwash.
Overall, and I've had the old rollup top into the big can and after they weather they leak and don't glide in the channels very easy. The Paragon is much better opening and closing especially if you get it "square" during install. I don't know what all the fuss about unable to open if something slides to the front. I've got a hook attached to a shovel handle that I can pull just about anything back to the tailgate. It's a pretty good lid for the money and I would recommend it to anyone tired of the roll up garage door on the bed of your truck, plus it's much lighter. Oh, and the security of the top. It's not intended to be Ft. Knox!!! Like any other lock or door, "It keeps honest people honest", there isn't a lock or cover on the planet that can keep a criminal out of your bed so quit UR whinning.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2020 Ford F-150
I have had my cover since 2021 it is still going strong. Best decision I have made when people see me open it I get flooded with questions about it. I did have to add a piece of velcro to the end of strap to hold it if I drive with cover open (so I can reach it to close it)
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2016 Toyota Tacoma
Had it 8 years.
Love it looks great works great.
Great customer support.
Keep up the great work.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2022 GMC Sierra 2500
This is the first Peragoncover I ever installed. After one adjustment, it works and looks great.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2022 Ram 1500
Nothing else can describe this cover other than 5 stars. Have had the cover for several months now and have to say it has performed flawlessly. From initial delivery, customer service to directions for install it has been a great experience and I recommend to everyone I know. **One thing to note is on the new gen Dodge Ram with split tail gate one of the bolts for the bed corner brackets has to be removed. Wasn’t a big deal but the instructions didn’t cover this. I’ll attach photos.**
This cover has been through rain, sleet, snow and driven at 80mph. Minimal water is the bed and zero noise from this cover. If you have noise or leaks, double check your install is done properly as per instructions.
Last thing - BAD ASS COVER FOR A BAD ASS TRUCK!
Thanks Peragon!!
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation