A reputation built one customer at a time
Trusted by tens of thousands
4.9 out of 4518 reviews
All product reviews
2021 Toyota Tundra
I just recently installed my truck bed cover and the install took me a little over 2 hours. Some of the instructions were vague on the measurements and the tools could have been packaged/labeled differently to help a consumer set it up. I also experienced troubles on the first few openings with the rubber stoppers shredding when closing the cover. After a few uses my cover slides easier but I did experience minor leakage during a storm. I have yet to install my tailgate seal so maybe that was the case but overall a good experience and great visual appearance.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2017 Nissan Titan
I have had the cover on a 2017 nissan titan for 2 years now. It looks good holds up good. Not a bad product but if you live anywhere with snow or it freezes, if it's closed you won't be able to open it for those months. As well as your tail gate will always be froze shut. Wish I would have went with a cap.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
Rebecca
2020 Chevrolet Silverado 1500
I wish there was a better design for tailgate seal.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2021 GMC Sierra 2500
The customer service and installation thanks to the video by far exceeded my expectations. I installed by myself in under two hours by watching the videos. The rail system and panel materials seem to have components that could fail at some point but overall very happy with the purchase. My father in law saw it and in fifteen seconds was ready to order one.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2021 Chevrolet Silverado 1500
Looks great. Low profile on the bed. Installation took longer than expected and the written instructions were hard to follow. Used the videos online for guidance.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2009 Ford F-350
Good design and easy installation
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2021 Ford F-150
Not as easy to install as videos. They must have used a lot of takes. Happy after the HOURS it took to install
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2021 Ram 1500
Installed cover on a new body style Ram 1500. Install videos were extremely helpful and right on point. After getting the cover installed, I did need to crawl in the bed with cover and tailgate closed to make fine tune adjustments to have rear seal touch tailgate. The final adjustments were easier to make after sunset with a partner letting me know if they could see light between seal and tailgate. I did have one seal between two of the panels start to roll out of place when closing the cover which ended up cutting the end of the seal.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2021 Chevrolet Colorado
The information and everything Peragon say's is accurate.
They said it would work with a Backrack original headache rack, it did but it had absolutely no clearance between the rails and the headache rack.
Rail mounts required drilling as stated by Peragon. The layout they provided for the front rail holes did not work (more holes in my bed). I have a factory Chevy bed liner that caused problems with the front mounts. Even without the bedliner the front mount layout probably would not have worked.
I had to take a significant amount of the bed liner out by cutting it to accommodate the panels when they were folded on the driver’s side. At 71 three crawls to the front of the box to trim bed liner was brutal.
Peragon stated all these difficulties, and I was aware before my purchase, but the installation was challenging with a headache rack and bed liner. This model was not available with the no drill mounts. I can see the advantage of models with no drill mounts. I spent a lot of time getting the mounts right in order to get the rails to align properly.
I am concerned about the durability of the panels. AT 65 and 70 MPH I can see deflections in the panels. They may fatigue in time.
In summary the integrity of the company is excellent. They provide excellent instructions and information. The installation was a little tough for me with the coordination of the headache rack and bed liner. I also find it difficult to remove the panel struts when removing the panels for full bed access. As an old guy (71) It may just be me with physical flexibility problems that presented some challenges. I am happy with the purchase and would purchase again. Excellent company.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2021 Toyota Tundra
I installed my cover last night, and it was about what I expected. As I think this is a great company and a decent cover, there are a few things I think that can be improved. I have a Toyota tundra with the bed rail system. I was very upset that I had to remove the bed rail in order to install this cover. I also believe like many other covers the frame should sit on top of the bed not sit on them very flimsy mounts that you must install on the bed. This is what took so long for the installation. I also expected the bed panels to be of more quality. They reminded me of sections from an aluminum roof. Anyways, I am satisfied so far with the cover and would not go to the hassle of taking it all apart to send back. I really think your research and development need to work a little better on the mounting system
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
Rebecca
2018 Ford F-150
great so far easy to make right i like it ....
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2018 Ford F-150
I really would give it a 4 1/2. Only three things preventing a 5 star. One cannot be helped at this time,and that is I really wanted Platinum White, but current restrictions would not allow. So, I went with black. It looks good with the black, but really desired Platinum White to match truck.
2nd - Need to have all bolts with same size heads. Having to switch back and forth between wrenches/sockets when assembling, adjusting bolts per directions, etc. is somewhat annoying, a more time consuming especially when assembling alone.
3rd - Need something to keep pull strap out of the way when tonneau closed, without losing the aspect of it sliding back and forth as you open and close tonneau. You have 3-4 feet of pull strap at the tailgate opening when tonneau closed. I thought about velcroing or tying it off somehow, but then tonneau panels can't drop properly. If you throw strap towards cab end of the truck bed to get it out of way, when you open tonneau, you cannot reach strap to close it.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
Rebecca
2019 Ram 1500
The installation was somewhat difficult, even after watching the videos. I still don't understand why the quick clamps would have to be bent up at a 1 degree angle. IMO a customer shouldn't have to bend anything from the factory, it should come ready to install. Despite the difficult installation, I really do like the product. The true test will be the Colorado hail we get sometimes. Overall, I'd recommend the product.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
Rebecca
2017 Ford F-250
1) please follow directions, set bed tabs to 1 degree up
2) don’t be disappointed at the first 15 open and closed positions/ activations. Some slight adjustments needed
3) could have thicker aluminum for less bounce during traveling down the road.
4) better waterproofing sealing
5) rubber plugs at panel corners don’t stay in place
6) other than that complements keep coming in, from others with different covers
7) it did improve mpg, approximately 1 to 1.5 mpg
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2011 GMC Sierra 2500
Installation went pretty smooth. Took 1 trip through hours of terrible driving rain, and it didnt leak. The only drawback with he cover is that if you load your bed with stuff you cannot open the cover to get the stuff. Thus having to crawl under the cover to retrieve things that are in the way of the “tracks”. We traveled for Christmas a few days ago, and I couldn’t load or unload the bed entirely unless the cover was extended and we crawled under to load or unload. That was a bit of a bummer, otherwise a great company and great customer service.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2020 Honda Ridgeline
Good instructions and videos. Almost all of my questions could be answered between the two. Works as advertised. I honestly believe that the truck now drives better on the interstate highway because of less turbulence. The only issue I have is that the rails had some minor visible scratches. No buyer's remorse.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2006 GMC Sierra 2500
Being a collision repair tech by trade, I have installed, or removed and installed for customers more bed covers than most people. The Peragon cover brackets must be absolutely perfectly aligned to make cover work correctly, The track alignment take the most time to setup on install. I don't like the fabric pull strap the ends up on the grease of my fifth wheel hitch, I think it should have a twist lock on front panel instead of just a key to turn latch/lock. Also if an object like a box or tire slides too far forward in bed, the cover doesn't have room to fold down and forward making you have to climb under bed to move objects in bed to open. When the cover is open while driving the cover makes noise moving forward in track while accelerating and forward in track decelerating. All in all its a nice product but probably will not be my first choice on my next project.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2016 Ford F-150
Great customer support and overall good cover. There are a couple of flaws to the design. The pull cord is located in the middle of the cover so consequently it is constantly in the way when loading things into the truck bed when the cover is closed. This could easily be fixed if there was a hook or something on either side to keep the tether out of the way. My second issue is when the cover is open and you are loading the bed with caries items. The space near the rear windows is not useable do to the cover being collapsed and having to be pulled over that area. This decreased capacity by at least a 1/3 if trying to load the bed with the truck cover collapsed and wanting the cover closed after loading. This problem was identified when we were trying to load the bed for a road trip and wanted the cover closed. To solve this issue we closed the cover and then had to crawl underneath in order to utilize the space. When releasing the cover it retracts quickly which can cause damage to items that are sticking up underneath. To avoid this you cannot load the front end of the bed. The last issue we have identified is there is no middle ground with this cover, it is either open or closed. We wanted the cover to retract 1/2 way to cover some items while being able to have some taller items in the bed. This is not possible.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
Rebecca
2019 Dodge Ram 1500
I appreciate that this cover is made in America. I also love the fact that this company supports veterans. The cover installation was a little more cumbersome than I expected but the amount of detail put into the installation videos alleviates most of the pain.
Use of the cover takes a little practice. It would be nice if you didn’t have to push it directly in the center to begin opening it. Otherwise it functions as advertised.
It does leak more water than I expected. It is also thinner than I expected. I don’t believe the cover will take any weight on top.
Aesthetically, it is the best looking cover on the market. All in all I am pleased with the product.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation
2020 Dodge Ram 1500
It is a very nice cover. It seems like alot of the things you have to do for install could have been done at the factory. I also think the pull cord should be connected to both sides not the middle so when you pull it pulls both sides evenly.
- Customer Support
- Ease of Use
- Strength and Durability
- Ease of Installation